Kinetra AutomationKinetraAutomation
Orange industrial robot arm with a vacuum gripper

Home / Cells

Cells

Each cell is a standard build – robot, gripper, infeed, pallet stations, guarding and HMI – configured to your cases and patterns. Start from the one closest to your line.

Collaborative column palletiser

KP-20 Compact

One line, light cases, tight floor. No fence.

Robot payload
20 kg
Max case weight
15 kg
Rated cases/min
8 (8 cycles × 1)
Infeed lines
up to 1
Footprint
3.4 × 3.0 m
Changeover
≈ 4 min, recipe select on HMI
Guarding
Safety laser scanners, no fixed fence
Hygiene
Dry zone, IP54 design
Products
Corrugated case (RSC), Shrink-wrapped tray
Top-view layout of the KP-20 Compact: 3.4 by 3 metres, 1 infeed line, 2 pallet stations IN 1Pallet 1Pallet 2 3.4 m 3.0 m KP-20 Compact · Top View
KP-20 Compact layoutDemonstration drawing

Industrial dual-infeed palletiser

KP-40 Duo

Two lines into one cell, dual pick, two pallet stations.

Robot payload
40 kg
Max case weight
25 kg
Rated cases/min
24 (12 cycles × 2)
Infeed lines
up to 2
Footprint
5.2 × 4.6 m
Changeover
≈ 8 min, recipe + manual gripper swap
Guarding
Fenced cell, light curtains at pallet exits
Hygiene
Dry and chilled zones, IP65 design
Products
Corrugated case (RSC), Shrink-wrapped tray, Reusable plastic crate, Bag or sack
Top-view layout of the KP-40 Duo: 5.2 by 4.6 metres, 2 infeed lines, 2 pallet stations IN 1IN 2Pallet 1Pallet 2 5.2 m 4.6 m KP-40 Duo · Top View
KP-40 Duo layoutDemonstration drawing

Stainless washdown palletiser

KP-HX Hygienic

Stainless frame and gripper for wet and washdown areas.

Robot payload
60 kg
Max case weight
30 kg
Rated cases/min
20 (10 cycles × 2)
Infeed lines
up to 1
Footprint
4.8 × 4.2 m
Changeover
≈ 10 min, tool-free gripper swap
Guarding
Stainless fence, light curtains, sloped surfaces
Hygiene
Washdown zone, IP69K design intent
Products
Corrugated case (RSC), Shrink-wrapped tray, Reusable plastic crate
Top-view layout of the KP-HX Hygienic: 4.8 by 4.2 metres, 1 infeed line, 2 pallet stations IN 1Pallet 1Pallet 2 4.8 m 4.2 m KP-HX Hygienic · Top View
KP-HX Hygienic layoutDemonstration drawing

High-rate multi-line palletiser

KP-120 Line

Up to three lines, layer forming, automatic tool change.

Robot payload
180 kg
Max case weight
40 kg
Rated cases/min
48 (14 cycles × 4)
Infeed lines
up to 3
Footprint
7.0 × 6.0 m
Changeover
≈ 5 min, automatic tool changer
Guarding
Fenced cell, muted light curtains, pallet-exit interlocks
Hygiene
Dry and chilled zones, IP65 design
Products
Corrugated case (RSC), Shrink-wrapped tray, Reusable plastic crate, Bag or sack
Top-view layout of the KP-120 Line: 7 by 6 metres, 3 infeed lines, 3 pallet stations IN 1IN 2IN 3Pallet 1Pallet 2Pallet 3 7.0 m 6.0 m KP-120 Line · Top View
KP-120 Line layoutDemonstration drawing

About these figures

Rated cases per minute assume the stated pick count per cycle, a standard EUR pallet (1200 × 800 mm), stable cases and a typical interlocked pattern. Real rates depend on your case, pattern and pallet change. All values are demonstration values of a fictional company.